Справочник Пользователя для Technicolor - Thomson 210i

♦ 

Password – Specify a password for authentication by the remote router. 

♦ 

Dial Number – Specify the destination ISDN number for dialup. 

♦ 

Scheduler (1-15) – Enter up to 4 index numbers for calls that have been 
previously configured on the Call Schedule Setup windows (under Advanced 
Setup). 

♦ 

Link Type – Indicate the dial-out link type. 

   Disable: Deactivate the dial-out action. 
   64kbps: Specify the outgoing connection speed is restricted to 64kbps 

(one B-channel). 

   128k bps: Specify the outgoing connection speed is 128kbps (two B-

channels). 

   BOD: Specify the link type to be dynamic bandwidth control 

(Bandwidth-on-Demand). 

♦ 

PPP Authentication – Specify the authentication method. Normally set to 
PAP/CHAP for the widest compatibility. 

♦ 

VJ Compression – VJ Compression means TCP/IP protocol header 
compression. Normally set to "On" to improve band-width utilization. 

♦ 

Callback Function (CBCP) – The callback function is implemented by the 
CBCP protocol that is one of the PPP protocol suite. 

   Require Remote to Callback - Inactive by default. When active, the 

router exchanges connection information with the remote router and 
requires the remote router to call back to make a connection. 

   Provide ISDN Number to Remote - In some cases, the remote router 

requires the ISDN number for calling back. Check here to allow the local 
router to send the ISDN number to the remote router. The remote router 
owner will be charged the connection fee by the telecom. 

♦ 

Username – Specify an username to authenticate the dial-in router. 

♦ 

Password – Specify a password to authenticate the dial-in router. 

♦ 

Enable CLID Authentication – Limit the dial-in router to be called from a 
specific ISDN number. 

♦ 

Peer ISDN Number – If CLID Authentication is enabled, enter the remote 
router's ISDN number in this field 

♦ 

Link Type – Refer to Dial-Out Settings. 

♦ 

PPP Authentication – Refer to Dial-Out Settings. 

♦ 

VJ Compression – Refer to Dial-Out Settings. 

♦ 

Callback Function (CBCP) – Checking here allows this router to accept 
requests from a remote router for call back. 

   Enable Callback Function - Checking here to enable this function. The 

router owner will be charged the connection fee by the telecom. 

   Use the Following Number to Callback: 

- Callback Number: Check here and enter a callback number for 
the router to call.