Справочник Пользователя для Technicolor - Thomson 210i

 

Usually you will use the router as a NAT-enabled router. NAT stands for Network 
Address Translation. It means the router gets one (in Single ISP, PPPoE, PPTP) or two 
(in Dual ISPs mode) globally re-routable IP addresses from the ISP. Local hosts will use 
private network IP addresses defined by RFC-1918 to communicate with the router. The 
router translates the private network addresses to a globally routable 
IP address that is then used to access the Internet. The following explains NAT features 
for specific applications. 
 
Click NAT Setup to open the setup page. On the page you will see the private IP address 
definitions defined in RFC-

 

1918.