Справочник Пользователя для Technicolor - Thomson 210i

Editing the Filter Rules 
 
Click the Filter Rule index button to enter the Filter Rule setup page for each filter. The 
following explains each configurable item in detail. 
 

♦ 

Comments – Enter filter set comment/description. Its maximum length is 14 
characters. 

♦ 

Check to enable the Filter Rule – Enable the filter rule. 

♦ 

Pass or Block – Specify the action to be taken when packets match the rule. 

   Block Immediately - Packets matching the rule will be dropped 

immediately. 

   Pass Immediately - Packets matching the rule will be passed 

immediately. 

   Block If No Further Match - A packet matching the rule and that does 

not match further rules, will be dropped. 

   Pass If No Further Match - A packet matching the rule, 

and that does not match further rules, will pass through. 

♦ 

Branch to Other Filter Set – If the packet matches the filter rule, the next 
filter rule will branch to the specified filter set. 

♦ 

Duplicate to LAN – If you want to log the matched packets to another 
network device, check this box to enable it. The MAC Address is defined in 
General Setup 

→

 MAC Address for Packet Duplication. 

♦ 

Log – Check this box to enable the log function. Use the Telnet command "log 
-f" to view the logs. 

♦ 

Direction – Set the direction of packet flow. For the Call Filter, this setting is 
irrelevant.                                                                                  
IN: Specify the rule for filtering incoming packets. 
OUT: Specify the rule for filtering outgoing packets.