Справочник Пользователя для Apple MA073LL/A

 

Use the information in this chapter if you are having 
trouble setting up your AirPort Extreme Base Station.

If the AirPort Setup Assistant can’t detect the proper AirPort hardware
Make sure that the computer you are using has an AirPort Card or an AirPort Extreme 
Card installed. If you recently installed the card, shut down your computer and make 
sure the card is properly installed. Make sure that the AirPort antenna cable is securely 
connected to the card (you should hear a click when the antenna is connected 
securely). Make sure that the other end of the card is firmly inserted into the connector 
in the AirPort Card slot.

If you forget your AirPort network or base station password
You can clear the AirPort network or base station password by resetting the base 
station. Follow these steps:

On a Mac, open Network preferences. Choose AirPort from the Show pop-up menu and 
choose Using DHCP from the Configure pop-up menu. On a computer using Windows 
XP or Windows 2000, open Control Panel from the Start menu, right-click Wireless 
Network Connection and choose Properties. Click Internet Protocol (TCP/IP) and click 
Properties. Make sure “Obtain an IP address automatically” is selected.

Press and hold the reset button for one full second. 

Reset
button

LL2870.book  Page 27  Thursday, October 28, 2004  12:45 PM