Справочник Пользователя для HP (Hewlett-Packard) AV8003

ENGLISH

 

  Start the network player.

  Set the remote controllerler to NETWORK 

mode.

 Press 

the 

< and > buttons on the remote 

controllerler to move the remote controllerler 
window to 005/005, and press the SETTINGS 
button.

  The SETTINGS window is displayed.

 

  Select Network Settings with the cursor and 

press the ENTER button.

  The Network Settings screen is displayed.

 

  The fi gures displayed in this screen are the 

settings for the current network address.

 

  We recommend that you make a copy of these 

settings, because they may be required when 
authenticating the unit from the server.

● Obtain IP Address :
The default setting is Automatic.
To change the setting, press the ENTER button to 
enable setting selections. Press the 

3 / 4 buttons to 

select an item and confi rm by pressing the ENTER 
button.
• Automatic 

:

  The address is obtained automatically from the 

DHCP server.

  If there is no DHCP server, the address is assigned 

using Auto-IP.

  If the address has been obtained automatically, 

select “OK” to complete the setting.

 Press 

the 

GUIDE button on the remote controller 

to return to the top menu.

• Manual 

:

  For manual input, see “Manual Setting”.

  If you selected Manual, input is possible for the 

following items.

Knowledge about the network is required for manual 
input. See the user guide for your router or modem.

● IP Address:
Set the IP address. For manual input, enter an IP 
address that is based on another device connected 
to the same network.
Example:
 

IP address of another device:  192. 168. 1. 2

 

IP address of the unit: 

192. 168. 1. xxx

Use a number for xxx that does not duplicate another 
device.

● Subnet Mask :
Set the subnet mask address. Enter the same 
number as the subnet mask of another network 
device, such as a router or computer.
Example: 255. 255. 255. 0

● Default Gateway :
Set the gateway address. If a router is used, this is 
usually the IP address of the router.
Example: 192. 168. 1. 1

● DNS Server :
Set the DNS server address. This is the address 
that is specifi ed by the provider, or the IP address 
of the router.
Example: 192. 168. 1. 1

● MAC Address :
This is the MAC address of the unit. This number 
cannot be changed.

Playback is possible even if the gateway and DNS are 
left blank, but value inputs are required to perform 
network updates.

 

  Select the item that you want to set with the 

3 

/ 

4 buttons and press the ENTER button.

 

  Select the position for entering the number with 

the 

1 / 2 buttons, and enter the number using 

the number keys.

 

  If a number does not have three digits, move to 

the next value using the 

1 / 2 buttons.

  Press 

EXIT to return the entered number to its 

original value.

Enter a number from 0 to 255.

If 256 or a higher number is entered, a warning is 
displayed

 

  After finishing the setting input, press the 

ENTER button and select the next item using 
the 

3 / 4 buttons.

 

 Repeat 

steps 

 and 

, and after fi nishing  all 

the inputs, select “OK” using the 

4 button and 

press the ENTER button.

 

  The settings completed dialog box is displayed. 

Press the ENTER button to restart.

•  If the EXIT button is pressed or “CANCEL” is 

selected with the 

4 button partway through the setting 

procedure, the screen returns to the SETTINGS 
screen and the entered settings are canceled.

• The unit cannot be set to standby while it is 

restarting.

  Do not turn the power of this unit off while it is 

restarting.

AV8003_U_Network_ENG.indb   5

AV8003_U_Network_ENG.indb   5

08.4.25   5:38:22 PM

08.4.25   5:38:22 PM