Справочник Пользователя для Cisco Systems 11000 Series
2-31
Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02
Chapter 2 Cabling the CSS
Connecting Power Cords
Warning
DC systems do not have a power switch. A chassis configured for DC power
requires an external power disconnect device (such as an external circuit
breaker).
requires an external power disconnect device (such as an external circuit
breaker).
Warning
Before performing the DC installation procedure, ensure that power is removed
from the DC circuit. To ensure that all power is off, locate the circuit breaker
that services the DC circuit and switch it off.
from the DC circuit. To ensure that all power is off, locate the circuit breaker
that services the DC circuit and switch it off.
To connect the CSS 11800 DC power supply to a power source:
1.
Locate the DC terminal block on the front of the chassis as shown in
Figure 2-20 Location of CSS 11800 DC Power Supply Connectors
–
+
PS1 DC
Terminal block
Terminal block
PS2 DC
Terminal block
Terminal block
49593
.35"
(9mm)