Справочник Пользователя для Fortinet 5103b
Upgrading cluster firmware
Basic Configuration
FortiController-5103B Session-Aware Load Balancer Guide
28
10-500-161552-20140822
Upgrading cluster firmware
Fortinet periodically updates the FortiController-5103B and worker (FortiGate) firmware
to include enhancements and address issues. After you have registered the
FortiController-5103B boards and workers in your cluster you can download
FortiController-5103B and FortiOS firmware from the support web site
to include enhancements and address issues. After you have registered the
FortiController-5103B boards and workers in your cluster you can download
FortiController-5103B and FortiOS firmware from the support web site
.
You upgrade the FortiController-5103B firmware from the FortiController-5103B
web-based manager or CLI. You can upgrade the worker firmware from the worker
web-based manager or CLI. The recommended procedure is to upgrade the worker first
and then upgrade the FortiController-5103B firmware.
web-based manager or CLI. You can upgrade the worker firmware from the worker
web-based manager or CLI. The recommended procedure is to upgrade the worker first
and then upgrade the FortiController-5103B firmware.
To upgrade worker firmware from the web-based manager
This procedure upgrades the firmware running on all of the workers in the cluster in a
single operation from the worker web-based manager. The firmware running on all of the
workers in the cluster is updated simultaneously.
single operation from the worker web-based manager. The firmware running on all of the
workers in the cluster is updated simultaneously.
1 Log into the worker web-based manager.
2 From the Global System Information dashboard widget beside Firmware Version
select Update.
3 Select the new firmware file and select OK.
The firmware image file is uploaded and verified then installed on all of the workers.
After a few minutes the cluster continues operating, the workers running the new
firmware build.
After a few minutes the cluster continues operating, the workers running the new
firmware build.
You can confirm that all of the workers are back in the cluster from the Load Balance >
Status page of the FortiController-5103B web-based manager.
Status page of the FortiController-5103B web-based manager.
To upgrade FortiController-5103B firmware from the web-based manager
If the cluster contains two FortiController-5103B boards, this procedure upgrades the
firmware running on both of them in a single operation.
firmware running on both of them in a single operation.
1 Log into the FortiController-5103B web-based manager.
2 From the System Information dashboard widget beside Firmware Version select
Update.
3 Select the new firmware file and select OK.
The firmware image file is uploaded and verified then installed on all of the
FortiController-5103B boards. After a few minutes the cluster continues operating.
FortiController-5103B boards. After a few minutes the cluster continues operating.
Verifying the configuration and the status of the boards in the
cluster
cluster
Use the following command from the FortiController-5103B CLI to verify that the
FortiController-5103B board can communicate with all of the FortiGate-5001B boards in
the cluster and to show the status of each board. For example, for the cluster shown in
FortiController-5103B board can communicate with all of the FortiGate-5001B boards in
the cluster and to show the status of each board. For example, for the cluster shown in
the command output would be the following if the cluster is
operating properly:
Upgrading the firmware may briefly interrupt network traffic so it should be done during
a quiet period.
a quiet period.