Инструкция С Настройками для Canon LV-7390
3
Computer Input
Auto PC Adjustment function is provided to automatically adjust
Fine sync, Total dots, Horizontal position and
Vertical position to conform to your computer.
PC adjust Menu
Auto PC Adjustment
To store adjustment parameters
The adjusted parameters from the Auto PC
Adjustment can be stored in the projector. Once the
parameters are stored, the setting can be done just
by selecting a
Mode (1–10) in the PC System Menu
(p.31). See also “Store” on page 34.
Note:
•
Fine sync, Total dots, Horizontal position
and
Vertical position of some computers
cannot be fully adjusted with the Auto PC
Adjustment function. When the image is not
provided properly with this operation, manual
adjustments are required (pp. 33-34).
• The Auto PC Adjustment cannot be operated
when
480i, 575i, 480p, 575p, 720p, 1035i or
1080i is selected in the PC System Menu
(p. 31).
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select
PC
adjust and then press the Point ► or the OK
button.
1
2
Use the Point ▲▼ buttons to select
Auto PC and
then press the OK button.
Auto PC
Menu Operation
Use Point ▲▼ buttons to select
Auto
PC and press the OK button.
Please wait... appears while the Auto
PC adjustment is in process.