Справочник Пользователя для Barco RLS W12

RLS W12  02/12/2014

15

3.Physical Installation

 

Turns blue 

 

 Indicates that the projector is in standby mode; this also means the projector has not 

been turned on by pressing the SOFT POWER button but has been connected to power. 

 

The indicator is off  

 This indicates that the projector has either been turned on and is working normally or 

the projector is not connected to power.

 

Turns green 

 

 This indicates that the projector has been turned on and is working normally.

 

Flashes in green   

 This indicates that the projector is currently warming up or cooling down and will not 

respond to button operations.

 

The indicator is off   

This indicates that the projector is currently in stand by mode.

 

Flashes once in red 

The projector lamp is faulty; check to see if the lamp is damaged or if it hasn't been   

    properly 

installed. 

 

Flashes twice in red 

The lamp cover is not properly replaced.

 

Flashes three times in red   The cooling fan inside the projector is not working; seek assistance from a qualified 

service personnel.

 

Flashes four times in red 

 The projector temperature is too high; try cleaning the ventilator slots or unplugging the 

power cord to resolve the issue. 

Flashes once in green and red:              The lamp is approaching the end of life. It should be replaced  with a new lamp. 

(ERROR)

(STANDBY)

(ON)

Standby

cooling / Warm up

Power on / Normal

Lamp is approaching the end 

of life

Lamp failure

Lamp door open

Fan failure

Overheating

System error

The time period of each step in the above LED blinking pattern is 500 milliseconds, e.g., for“Cooling / 
Warm  up”state, the green LED will ON for 500 milliseconds, and then OFF 500 milliseconds, and then 
repeat the above LED pattern.