Справочник Пользователя для Barco 101-B
PJWU-101B 17/10/2014
38
7.Input
7.2 Input Selection
Use this function to specify the source of image connected to the rear of the projector. For instance, if you have connected
your PC as the video input source, you can choose RGB D-15(RGB-HV/SOG) to be the input for image projection. Options of
input available on the projector include:
your PC as the video input source, you can choose RGB D-15(RGB-HV/SOG) to be the input for image projection. Options of
input available on the projector include:
HDMI1, HDMI2, RGB D-15(RGB-HV/SOG), YUV1(RGB-S), YUV2(RGBHV/
YUV2).
7.3 Input Configuration
Select Input Configuration from the Advanced menu to choose the color space of the source signal for HDMI, VGA, and
component connections.
component connections.
The default setting, Auto, functions as follows:
AUTO
The Auto setting determines the correct color space to use. If it does not, you can force the PJWU-101B to use a specific color
space. Choose one of the following:
space. Choose one of the following:
• Auto(default)
• YUV-HD
• YUV-SD
• RGB-PC
• RGB-Video
• YUV-HD
• YUV-SD
• RGB-PC
• RGB-Video
HDMI
For component SDTV and EDTV resolutions, YUV STD is used. For other component video resolutions, YUV HD is used.
VGA
YUV STD is used for SDTV and EDTV sources, and YUV HD for all other sources.
Component
For SDTV and EDTV resolutions, uses the YUV STD. For all other resolutions YUV HD is used.
7.4 Input Locking
What is possible?
The output signal can be locked on an internal sync signal or on the sync signal of one of the input sources. Or it can follow
the input of the Main window or Pip window. When locked to the corresponding input sync, the output will be shown without
movement artifacts. With locking to a specific input, a set of projectors can be kept in sync, no matter what input image is
shown.
the input of the Main window or Pip window. When locked to the corresponding input sync, the output will be shown without
movement artifacts. With locking to a specific input, a set of projectors can be kept in sync, no matter what input image is
shown.
Use this function to specify the frequency of the image input signal. You can let the projector determine the optimal
projection frequency or force the projector to project image at the frequency you specify.
projection frequency or force the projector to project image at the frequency you specify.
Auto
The preset value for this function is
Auto
. If you specify vertical refresh frequency from the input device to be between
48~62Hz, the projector will automatically lock the frequency of the input signal so that both signal input and output will be
refreshed at the same frequency in order to achieve optimal image output. If the frequency of the input signal falls between
24~31Hz, the projector will automatically double the vertical refresh frequency. If the frequency of the input signal falls
between 31~48Hz or exceeds 62Hz, the projector will automatically set the frequency to 60Hz.
refreshed at the same frequency in order to achieve optimal image output. If the frequency of the input signal falls between
24~31Hz, the projector will automatically double the vertical refresh frequency. If the frequency of the input signal falls
between 31~48Hz or exceeds 62Hz, the projector will automatically set the frequency to 60Hz.
48Hz, 50Hz, 60Hz
Choose this option to set image output frequency at 48Hz, 50Hz or 60Hz