Справочник Пользователя для Barco 4MP/6MP
40
Coronis Fusion 4MP/6MP
T
O
ENABLE
THE
USER
CONTROLS
AGAIN
USING
THE
TOUCH
KEYS
:
1
To enter the user controls keycode, the OSD must not be visible.
2
Touch any of the soft touch keys to switch on the front
illumination.
illumination.
3
While the illumination is on, touch the following keys in successive
order:
Enter
order:
Enter
,
Down ,
Up ,
Down ,
Enter .
As a result, the User Controls setting in the Settings menu is switched
on again.
on again.
T
O
ENABLE
THE
USER
CONTROLS
AGAIN
USING
THE
CONTROL
WHEEL
:
1
The OSD must not be visible.
2
Press and hold the control wheel for at least 5 seconds.
3
Rotate the control wheel 1 step clockwise.
4
Press the control wheel 2 times.
5
Rotate the control wheel 1 step counterclockwise. The on-screen
display appears.
display appears.
As a result, the User Controls setting in the Settings menu is switched
on again.
on again.
Steps 3 to 5 must be performed in maximum 3 seconds.