Справочник Пользователя для Benq W9000
23
Using the projector
English
POP ---
Personalizing the projector menu display
The On Screen Display (OSD) menus can be set according to your preferences. These settings do not affect the
projection settings, operation, or performance.
projection settings, operation, or performance.
• Language in Setup menu sets your familiar language for the on-screen menus.
• You can select the projector’s Background Color from purple, black or white in Options menu.
• OSD Off (Secs) in Options Menu sets the length of time the OSD will remain active after the last button
• You can select the projector’s Background Color from purple, black or white in Options menu.
• OSD Off (Secs) in Options Menu sets the length of time the OSD will remain active after the last button
press.
• Sleep Timer (Min) in Options menu sets the length of time the projector will auto shutdown.
• OSD Position H and OSD Position V in Options menu adjust the OSD position on the screen.
• OSD Position H and OSD Position V in Options menu adjust the OSD position on the screen.
Saving and loading the video memory
There are four video settings: USER, ISF DAY, ISF NIGHT, and DEFAULT.
•
USER: This stores the values of any items you have adjusted in the Picture
menu.
menu.
for information about how to save the User memory.
•
ISF DAY and ISF NIGHT: The ISF DAY and ISF NIGHT memories are set
according to the ambient lighting conditions in the daytime and night
time of the room where the projector is installed. The ISF settings must be
calibrated and stored by an certified ISF calibrator using ISF calibration
standards.
according to the ambient lighting conditions in the daytime and night
time of the room where the projector is installed. The ISF settings must be
calibrated and stored by an certified ISF calibrator using ISF calibration
standards.
•
DEFAULT: Restores the default settings for the current input source.
To recall the memories, you can perform one of the following steps.
•
Press the video memory buttons on the remote control or MEMORY c on the projector.
•
Go to the Picture > Loading Settings menu.
Turning the power off
To turn the projector off, press the POWER button on the projector or
remote control and a warning message appears. Press POWER again.
remote control and a warning message appears. Press POWER again.
• The Power indicator light flashes green and the fans run for about two
minutes to cool the lamp. The projector will not respond to any
commands until the cooling process is complete.
commands until the cooling process is complete.
• Then, the Power indicator light is a steady orange once the cooling
process has finished and fans stop.
• If the projector will not be used for an extended period, turn the main
power switch off and unplug the power cable from the power outlet.
SIZE
Right window
Left window