Справочник Пользователя для Runco LS-HB
32
Runco LS-HB/LS-HB Ultra Installation/Operation Manual
PRE
L
IMINAR
Y
3.7
Connections to the
LS-HB
Connections to the
LS-HB
Proceed as follows to connect the LS-HB to your video sources, external controller(s) – if
present – and AC power.
present – and AC power.
When connecting your equipment:
• Use the correct signal cables for each source.
• For best performance and to minimize cable clutter, use high-quality cables that are
only as long as necessary to connect two devices. (Don’t use a 20-foot cable when a
6-foot cable will suffice.)
6-foot cable will suffice.)
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Connector Panel Access
Using a flat-blade screwdriver, loosen the two
screws holding the rear compartment cover
in place.
screws holding the rear compartment cover
in place.
Then, remove the rear compartment cover by
tilting it upward.
tilting it upward.
➤