Справочник Пользователя для Ricoh PJ WX3231N
64
Using the Network Utility
Displaying a computer’s screen via the projector
1
Launch the Network Utility
software application.
When the
Network Utility launches, the Screen
Image transmission mode window appears on
the computer screen.
To switch to the
the computer screen.
To switch to the
Screen Image transmission
mode window from another mode, click the
Screen Image icon
Screen Image icon
.
If a message reporting a firewall block appears,
select “
select “
Allow access”.
2
Select Transmission mode.
Click
Update automatically or Update
manually. See step
6
for the descriptions of
Update automatically and Update manually.
3
Click the Advanced button.
The
Screen Image: Advanced Settings dialog
appears. Set the dialog as shown below, as
necessary.
necessary.
Interruption
Check the
Check the
No Interruptions checkbox to
prevent other computers from interrupting the
projector, for example, during a presentation.
Window Display
Select the
projector, for example, during a presentation.
Window Display
Select the
Place in Tasktray at the start
of transmission checkbox to iconify the
Network Utility and place it in the computer’s
tasktray when transmission initiated.
To display the window, double click this icon,
or right click and select
Network Utility and place it in the computer’s
tasktray when transmission initiated.
To display the window, double click this icon,
or right click and select
Open from the popup
menu. Even with the
Network Utility window
minimized, you can use the pop-up menu to
stop or resume transmission as described in
step
stop or resume transmission as described in
step
4
and later.
Transmission Mode (Image)
Selecting
Selecting
High quality improves the
quality of the projected image, but lowers
communication speed. Selecting
communication speed. Selecting
High speed
has the opposite effect.
Transmission Mode (Sound)
Check the
Transmission Mode (Sound)
Check the
Transmit sound to a projector (Only when connected with one
projector) checkbox to transmit the sound being played on a computer to the projector.
Note: The sound can be sent when only one projector is connected.
Note: The sound can be sent when only one projector is connected.
•
•
•
•