Справочник Пользователя для Viewsonic VS12617

 

21

¾

The projector does not turn on.   

Cause   

Remedy   

There is no power from the power 

cord.  

Plug the power cord into the AC inlet on the projector, 

and plug the power cord into the power outlet.   

Attempting to turn the projector on 

again during the cooling process.   

Wait until the cooling down process has completed. 

 

¾

No picture 

Cause   

Remedy   

The video source is not turned on or 

connected correctly.   

Turn the video source on and check that the signal 

cable is connected correctly.   

The projector is not correctly 

connected to the input signal device.   

Check the connection.   

The input signal has not been 

correctly selected.   

Select the correct input signal with the SOURCE key 

on the projector or remote control.   

The lens cover is still closed.   

Open the lens cover.   

¾

Blurred image 

Cause   

Remedy   

The projection lens is not correctly 

focused.  

Adjust the focus of the lens using the focus ring.   

The projector and the screen are not 

aligned properly.   

Adjust the projection angle and direction as well as 

the height of the projector if necessary.   

The lens cover is still closed.   

Open the lens cover.   

¾

Remote control does not work 

Cause   

Remedy   

The battery is out of power.   

Replace the battery with a new one.   

There is an obstacle between the 

remote control and the projector.   

Remove the obstacle.   

You are too far away from the 

projector.  

Stand within 6 meters of the projector.