Справочник Пользователя для Vivitek D5185HD

DLP Projector—User’s Manual

— 48 —

LED Error Messages

OWER

LED

EMP

LED

AMP

LED

RROR

ODE

ESSAGES

LUE

Lamp Ready

－

Start

－

flashing

－

Cooling

－

flashing

－

Over Temperature

－

Thermal Break Sensor error

－

4 blinks

Lamp Error

－

5 blinks

－

Burner Fan error

－

6 blinks

1 blinks

－

System Fan error

－

6 blinks

2 blinks

－

Power and Ballast Fan error

－

5 blinks

－

1 blinks

Case Open

－

7 blinks

－

DMD error

－

8 blinks

－

Color wheel error

－

9 blinks

－

In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re-
starting the projector. If the Power or Lamp LEDs are still blinking or the Temp LED is lit, contact your
service center.

Image Problems

Problem: No image appears on the screen

1. Verify the settings on your notebook or desktop PC.

2. Turn off all equipment and power up again in the correct order.

Problem: The image is blurred

1. Adjust the Focus on the projector.

2. Press the Auto button on the remote control or projector.

3. Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.

4. Check that the projector lens is clean.

Problem: The image is wider at the top or bottom (trapezoid effect)

1. Position the projector so it is as perpendicular to the screen as possible.

2. Use the Keystone button on the remote control or projector to correct the problem.

Problem: The image is reversed

Check the Projection setting on the Display Setings menu of the OSD.

Problem: The image is streaked

1. Set the Frequency settings on the Image Settings>Advanced menu of the OSD to the

default settings.

2. To ensure the problem is not caused by a connected PC’s video card, connect to another

computer.

Problem: The image is flat with no contrast

Adjust the Contrast setting on the Image menu of the OSD.

Problem: The color of the projected image does not match the source image.