Справочник Пользователя для Epson EB-95

Check

Remedy

Is the image signal format setting correct?
(Only when projecting images from a video source)

Change the setting according to the signal for the connected equipment.

s

 Signal - Video Signal 

Are the cables connected correctly?

Check that all the cables required for projection are securely connected.

s

Is an extension cable being used?

If an extension cable is used, electrical interference may affect the signals. Use the cables supplied with the projector to
check if the cables you are using may be causing the problem.

Is the correct resolution selected?
(Only when projecting computer images)

Set the computer so that the signals being output are compatible with the projector.

s

s

 Computer's documentation

Are the Sync.

 and Tracking

 settings adjusted correctly?

(Only when projecting computer images)

Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic
adjustment. If the images are not adjusted correctly even after performing automatic adjustment, you can also make
adjustments from the Configuration menu.

s

 Signal - Tracking, Sync. 

Is Transfer layered window selected?
(Only when projecting USB Display)

Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then clear the
Transfer layered window

 checkbox.

Check

Remedy

Is a wide panel computer image being projected?
(Only when projecting computer images)

Change the setting according to the signal for the connected equipment.

s

 Signal - Resolution 

Is the image still being enlarged by E-Zoom?

Press the [Esc] button on the remote control to cancel E-Zoom.

s

Is the image position adjusted correctly?

(Only when projecting analog RGB signals input from the Computer1 or Computer2 port)
Press the [Auto] button on the remote control or the [Enter] button on the control panel to adjust the position.
You can also adjust the position from the Configuration menu.

s

 Signal - Position