Справочник Пользователя для Epson PowerLite 51c

Once you’ve connected the projector to your computer or other 
equipment (as described in Chapter 1), you’re ready to turn on the 
projector, adjust the image, and give your presentation. This chapter 
covers the following:

■

Turning on the projector and other equipment

■

Adjusting your image

■

Using the remote control

■

Controlling audio and video

■

Highlighting your presentation

■

Shutting down the projector and other equipment

Make sure your projector and other equipment are set up and 
connected correctly, as described in Chapter 1. Then plug in and turn 
on your equipment, as described below. 

Follow these steps to plug in and turn on your equipment:

1. If you’re projecting video, 

first plug in and turn on 
your VCR, DVD player, or 
other video source. (If 
you’re projecting from a 
computer, go to step 2.)

2. To turn on the projector, 

first connect one end of the power cord to the projector’s power 
inlet on its left side.