Справочник Пользователя для Epson PowerLite 51c

2. Insert the two AA batteries 

included with the projector 
as shown.

3. Replace the battery cover.

1. Push up the 

R/C

 switch on the side of the remote control to turn 

it on.

2. Point the remote at the front of the projector or at the screen. 

3. Press the button for the function you want to use. The light next 

to the 

Power

 button on the remote control flashes briefly. (If 

it doesn’t flash, you may have inserted the batteries incorrectly or 
need to change the batteries; see page 32 for instructions.)

The projector may not respond to remote control commands in these 
conditions:

■

You are too far away or not within a 30° horizontal or 15° vertical 
angle of the projector’s sensor

■

The 

R/C

 switch on the right side of the remote control is in the 

OFF

 position (the remote control is turned off)

■

Batteries are weak

■

Bright ambient light, fluorescent light, or direct sunlight is 
shining into the remote control sensor

■

Equipment emitting infrared energy (such as a radiant room 
heater) is nearby and interfering with the sensor

■

■

■

■

R/C switch

power 
indicator 
light