Справочник Пользователя для Epson EH-TW3800

Starting and Stopping Projection

Simply pressing         or              does not stop 

electricity consumption.

If more than one signal source has been connected, or if no images are projected, use the remote control or the 
projector's control panel buttons to select the signal source. For video devices, press the [Play] button on the video 
equipment first, then select the signal source. 

Press the button that has the name of the port 
on it that the desired signal source is connected 
to.

When you press         , the menu is displayed.

Each press of          moves the pointer. Move the pointer to the 
target input source to select it.
The input source is automatically switched when no operations are 
performed about three seconds with placing pointer at the target 
input source. You can also press        to switch to the target source.

Turn the power off for the signal sources 
that are connected to the projector.

Press       on the remote control or           on 
the projector's control panel. 

Attach the lens cover.

When cool-down   (approximately 16 seconds) 
is completed, flashing around the            stops 
and you can then turn off the main power 
switch.

TIP

When the color of the image projected from the [Component] input port is 
unnatural, select an appropriate signal according to the signal from the device 
connected at "Input Signal" in the Configuration menu.       p.37

If the projector is suspended from a ceiling and the 

lens cover is left removed, the lens cover will still be 

needed if the projector is moved anywhere, so keep 

it in a safe place.

 

The following message is displayed, so press        or                

    once more.

When the projector is suspended from a ceiling, you can use the cable cover to improve the appearance.