Справочник Пользователя для EIKI LC-XB41N

37

5. Wireless LAN Configurations

Computer environment and Wireless LAN connection;

Wireless LAN with Easy setting connection will be made via AdHoc IEEE802.11b mode.  For

setting contents, refer to “Wireless LAN factory default settings” (p.38).

With the Easy setting, computer’s LAN environment setting will be switched to the settings on

page 38. Because of that, the LAN cannot work for the other operation while using

“NetworkModule Client” or “NetworkModule Moderator”.

After terminating the application, the LAN environment will automatically go back to the

previous state.

Display the current LAN connecting environment. Select “Wireless Information” (p.35) and

press the SELECT button.  

Select “Wireless Factory Default” from the projector menu (p.35) and press the SELECT button.

All the LAN settings will go back to the factory default settings. For details, refer to “Wireless

LAN Factory Default Settings” (p.38).

The User PIN code is to restrict the access from the networks to the projector.

After setting the User PIN code, you need to enter it to operate the projector via the networks.

Select “User PIN code” from the projector menu. Set with the same procedures as setting

Wired LAN User PIN code. Refer to “4. Wired LAN Configurations” 

➔ “User PIN code” (p.30).

NetworkModule Information

MAIN PROGRAM : 

xxxxx

BOOT PROGRAM : 

xxxxx

MAC ADDRESS : 

08007B650056

IP ADDRESS : 

169.254.53.0

SUBNET MASK : 

255.255.0.0

GATEWAY ADDRESS : 

255.255.255.255

IP CONFIGURATION : 

DHCP

ARP + PING :  

Enable

WIRELESS MODE : 

802.11b

NETWORK TYPE : 

AdHoc

CHANNEL : 

11

SSID : 

WIRELESS

WEP : 

Disable

CONNECTED PC : 

(None)

Wireless Information (Example)