Справочник Пользователя для EIKI LC-XB41N

6. Configurations with Browser

Wireless related items can be configured

on this screen.

This screen will not be displayed at Wired

LAN setting.

Parameter

Description

Wireless Mode ................................Select the Communication standard 802.11b or 802.11b.g

Network Type ....................................Select either “Infrastructure” or “AdHoc”.

SSID* ..............................................Set the SSID/ESSID. (up to ASCII 32 characters)

SSID/ESSID is case-sensitive. Even though all characters on the

Wireless information is uppercase, it is necessary to distinguish

between upper case and lower case characters.

Channel................................................If you use the projector in 802.11AdHoc mode, select the channel, from 1 to

11.

WEP Security ..................................Select “Enable” or “Disable” the WEP (Encryption).

When using WEP, select any of following items corresponding to this

WEP; “Enable 40-bit”, “Enable 104-bit”, “Enable 128-bit”, and “Enable

(802.1x”LEAP”).”

When enabling WEP (Encryption), the image transfer speed may become

slower.

WEP Key#1–Key#4..........................Set WEP key in the hexadecimal notation (0 to F). 5 bytes are set for 40-

bit WEP, 13 bytes are set for 104-bit, and 16 bytes are set for 128-bit

WEP. Four WEP keys can be set, however, the only one with check on

its radio button is in effect. Both of the number and value of the WEP

key in effect must be same as those of your computer and the access

point.

Depending on computers and access points, you may be allowed to

select only one WEP key. In this case, use WEP key 1.

LEAP Username/Password ............When selecting 802.1 x “LEAP” in WEP security, enter the user name

and the password. Enter with ASCII 64-byte capital characters and one-

byte characters. Consult your system administrator about the user name

and the password.

APPLY button ..................................Click the APPLY button to update. The screen to restart the projector will be

displayed.

REFRESH button ............................Update and show the adjusted data.

RESTORE Factory Default

Settings button ..........Restore the settings to the values at the factory.

Wireless Setting