Справочник Пользователя для EIKI LC-XB28

– Do not drop or bump a projector, otherwise damages or

malfunctions may result.

– When carrying a projector, use a suitable carrying case.
– Do not transport a projector by using a courier or transport

service in an unsuitable transport case.  This may cause
damage to a projector.  To transport a projector through a
courier or transport service, consult your dealer for their
information.

When moving the projector, replace the Lens Cover and
retract Adjustable Feet to prevent damage to the lens and
cabinet.

Do not tilt the projector more than 20
degrees above and below. 

Do not point the projector up to

project an image. 

Do not point the projector down to

project an image. 

Do not put the projector on either

side to project an image. 

Install the projector properly. Improper Installation may reduce

the lamp life and cause a fire hazard.

Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered. 

Hot air is exhausted from the exhaust vent.  When using or
installing the projector, the following precautions should be
taken. 
– Do not put any flammable object or spray can near the

projector, hot air is exhausted from the ventilation holes.

–  Keep the exhaust vent at least 3’(1m) away from any

objects.

–  Do not touch a peripheral part of the exhaust vent,

especially screws and metallic part.  This area will become
hot while the projector is being used.

–  Do not put anything on the cabinet.  The materials put on

the cabinet will not only get damaged but also cause fire
hazard by heat.

Cooling fans are provided to cool down the projector.  This
projector monitors internal temperature and control the
running speed of the cooling fans.  

20˚

20˚

Air Intake Vent

Air Intake Vent

Exhaust Vent
(Hot air exhaust)

Air Intake

Vent