Справочник Пользователя для EIKI LC-XB28
19
Basic Operation
Basic Oper
ation
Press the POWER ON-OFF button on the top control
or on the remote control, and a message "Power off?"
will appear on the screen.
or on the remote control, and a message "Power off?"
will appear on the screen.
Press the POWER ON-OFF button again to turn off the
projector. The POWER indicator will start to blink red,
and it continues while the cooling fans are operating
for about 90 seconds. (About 120 seconds when the
fan mode is L2. See page 44.)
projector. The POWER indicator will start to blink red,
and it continues while the cooling fans are operating
for about 90 seconds. (About 120 seconds when the
fan mode is L2. See page 44.)
1
2
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU
TURN PROJECTOR ON, WAIT AT LEAST 5
MINUTES BEFORE TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD
WHILE COOLING FANS ARE RUNNING OR
BEFORE POWER INDICATOR LIGHTS RED.
OTHERWISE IT WILL RESULT IN SHORTENING
LAMP LIFE.
TURN PROJECTOR ON, WAIT AT LEAST 5
MINUTES BEFORE TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD
WHILE COOLING FANS ARE RUNNING OR
BEFORE POWER INDICATOR LIGHTS RED.
OTHERWISE IT WILL RESULT IN SHORTENING
LAMP LIFE.
3
When the projector has cooled down enough to be
turned on again, the POWER indicator will become
red. Then you can disconnect the AC power cord.
turned on again, the POWER indicator will become
red. Then you can disconnect the AC power cord.
The message will disappear after 4 seconds.
✔Note:
• The projector cannot be turned on during the cooling period with
the POWER indicator blinking red. You can turn it on again after
the POWER indicator lights red.
the POWER indicator lights red.
• When the On start function is on, this projector is turned on
automatically by connecting the AC power cord to an AC outlet.
(See page 41 for the On start function.)
(See page 41 for the On start function.)
• Do not operate the projector continuously without rest. Continuous
use may result in shortening the lamp life. Turn off the projector
and give it a rest about an hour in every 24 hours.
and give it a rest about an hour in every 24 hours.
• This projector monitors internal temperature and automatically
controls the running speed of the cooling fans.
• If the WARNING indicator blinks or lights red, see “Warning
Indicator” on page 45.
Turning Off the Projector