Справочник Пользователя для Epson 200

In addition to your projector’s twelve memory settings (six standard and six advanced), you 
can store any number of settings on your computer’s hard drive. You can also use Cinema 
Color Editor to rename or delete memory settings stored on your projector.

In Cinema Color Editor, open the 

File

 menu, then choose one of the following:

■

Save setting

 to store the current Cinema Color Editor settings on your computer’s hard 

drive. 

■

Set from file

 to adjust the picture from settings previously saved on your hard drive.

Note: You can also transfer settings directly between the projector’s memory and your computer’s 
hard drive using the File Read and Save In File buttons (shown in the figure below).

1. Select 

Picture Quality

, then click 

Memory management 

and choose 

Edit

.

2. Click the tab where your setting is stored (

Standard

 or 

Advance

), select the setting 

whose name you want to change, then click 

Memory Name Change

.

3. Type a name up to 12 characters long, then click 

OK

. 

1. Select 

Picture Quality

, then click 

Memory management 

and choose 

Edit

.

2. Select the setting you want to delete, then click 

Memory Reset

 and confirm the 

deletion.

1. Select Standard 

or Advance

2. Select the setting 

whose name you 
want to change

3. Click Memory 

Name Change