Справочник Пользователя для Garmin 720C
14
Setting Up the Projector
Amplifying Computer Audio
Your laptop probably has its own sound system; however, it may not
be adequate for your presentation. If you need more volume, you can
connect a computer audio cable to take advantage of the projector’s
built-in amplifier and speaker. You can obtain a computer audio cable
(3.5-mm stereo miniplug cable) from a computer or electronics dealer.
be adequate for your presentation. If you need more volume, you can
connect a computer audio cable to take advantage of the projector’s
built-in amplifier and speaker. You can obtain a computer audio cable
(3.5-mm stereo miniplug cable) from a computer or electronics dealer.
1. Connect one end of the audio cable to the
Audio In
jack on the
projector.
2. Connect the other end of the audio cable to your laptop’s
headphone jack or
audio-out jack. (Jack locations vary; see
your computer manual if you’re not sure which jack to use.)
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 20 for instructions.
your projector and turn it on. See page 20 for instructions.
720-730.book Page 14 Thursday, October 30, 2003 11:32 AM