Справочник Пользователя для Acer P5271

ish

Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions

are not supported under HDMI or Video mode.

Note: "Sharpness" function is not supported under HDMI or computer

mode.

Note: "3D Sync L/R" is only available when 3D is enabled.

Note: There has reminder screen if 3D still enable when power on projector.

Please adjust setting depended on your purpose.

Note: It needs correct settings on graphic card 3D application program for

correct 3D display.

The SW players, such as Stereoscopic Player and DDD TriDef Media Player can
support 3D format files. You can download these two trial version players on
web page below:

•

Stereoscopic Player: http://www.3dtv.at/Downloads/Index_en.aspx

•

DDD TriDef Media Player: http://www.tridef.com/download/TriDef-3-D-
Experience-4.0.2.html

Keystone

Adjust image distortion caused by tilting projection. (±40 degrees)

H. Position

(Horizontal

position)

•

Press

to move the image left.

•

Press

to to move the image right.

V. Position

(Vertical position)

•

Press

to move the image down.

•

Press

to move the image up.

Frequency

"Frequency" changes the projector's refresh rate to match the

frequency of your computer’s graphics card. If you can see a vertical

flickering bar in the projected image, use this function to make the

necessary adjustments.

Tracking

Synchronizes the signal timing of the projector with the graphics card.

If you experience an unstable or flickering image, use this function to

correct it.

Sharpeness

Adjusts the sharpness of the image.

•

Press

to decrease the sharpness.

•

Press

to increase the sharpness.

Choose "On" to enable DLP 3D function.

•

On: Choose this item while using DLP 3D glasses, quad buffer
(NVIDIA/ATI…) graphic card and HQFS format file or DVD with

corresponding SW player.

•

Off: Turn off 3D mode.

3D Sync L/R

If you see a discrete or overlapping image while wearing DLP 3D

glasses, you may need to execute "Invert" to get best match of left/

right image sequence to get the correct image (for DLP 3D).