Справочник Пользователя для JVC 0210TTH-SW-VP

I

This is an input terminal for video signals. Connect it to 
the video output terminal of the computer. 
(

A Page 21, 23)

J

Enables control of this projector by connecting it to a 
computer.

K

Enables control of this projector using a computer that is 
connected to the network.

L

This is the RS-232C interface-specific terminal. This 
projector can be controlled by connecting it to a computer 
using a RS-232C cable.

M

B] Button

Pressing this button for one second or longer when in the 
standby mode (main power supply is ON) turns on the 
power of the projector unit. Pressing it for one second or 
longer when the power is ON switches the projector to 
the standby mode.

N

This indicator lights up in red when abnormality occurs on 
this projector. For details, refer to 

O

This indicator lights up in yellow when the lamp time 
exceeds 1900 hours.

● For details on indicator displays during warnings, refer 

to 

● A lamp life message appears when the lamp time has 

exceeded 2000 hours.
(

P

Connect the supplied cord to this terminal.

Q

Use this to turn ON/OFF the main power supply of the 
projector unit.

R

Lit (Red)

: When in the standby mode.

Lit (Green)

: When power is supplied.

Blinking (Red)

: When cooling down (cool down mode). 

Blinking (Green) : When the projected image is 

temporarily hidden. (

● For details on indicator displays during warnings, refer 

to 

OPERATE I/

B

DVI 3

USB

LAN

RS-232C

STANDBY/ON

CONTROL

LAMP

WARNING

DVI 4

DVI 1

DVI 2

I

R

O

J K L

N

M

P

Q