Справочник Пользователя для Hitachi CP-X985W

ENGLISH-9

ENGLISH-9

1. Check that the power cord is connected correctly.
2. Set the power switch to [ | ]. The standby mode is selected, and the POWER indicator is turned to

orange.

3. Press the STANDBY/ON button 

on the control panel or the remote control transmitter.

Warm-up begins and the POWER indicator blinks in green.

4. The POWER indicator ceases blinking and turns to green when power is on. Remove the lens

cap.

5. Adjust picture size using the ZOOM button.
6. Adjust focus using the FOCUS button .

1. Press the STANDBY/ON button 

on the control panel or the remote control transmitter for

approximately two second. The projector lamp is extinguished and lamp cooling begins. The
POWER indicator blinks orange during lamp cooling. Pressing the STANDBY/ON button 
has no effect while the POWER indicator is blinking.

2. The system assumes the Standby mode when cooling is complete, and the POWER indicator

ceases blinking and changes to orange. Check that the indicator is orange and set the Power
switch to [

O

].

3. The POWER indicator is extinguished when power is off. Attach the lens cap.

Power Switch

Lens cap

STANDBY/ON Button

POWER Indicator

STANDBY/ON

LASER

VIDEO

BLANK

RGB

AUTO

MENU

MENU SELECT

POSITION

RESET

FREEZE

MAGNIFY

PinP

OFF

VOLUME

MUTE

ZOOM

FOCUS

STANDBY/

ON Button

ZOOM button

FOCUS button

• Except in emergencies, do not turn off unless the POWER indicator is orange as it will

reduce the life of the projector lamp.
• To prevent any troble, turn on/off the projector when the computer or video tape recorder is OFF.
Providing a RS-232C cable is connected, turn on the computer before the projector.

FOCUS button

ZOOM button

manuals search engine