Справочник Пользователя для Acer XD1250D series

Installation

English ...

Warning Indicator



When the “

LAMP” indicator lights solid red, the projector will

automatically shut itself down. Please contact your local reseller

or service center.



When the “TEMP” indicator lights solid red for about 20 sec-

onds, it indicates the projector has been overheated. You will see

a message “Projector Overheated. Lamp will automatically turn

off soon.” on the on-screen display. The projector will automati-

cally shut itself down.

Under normal conditions, the projector can be switched on again

after it has cooled down. If the problem persists, you should con-

tact your local dealer or our service center.



When the “TEMP” indicator ﬂ ashes red for about 30 seconds,

you will see a message “Fan fail. Lamp will automatically turn off

soon.” on the on-screen display. Please contact your local dealer

or our service center.

Powering Off the Projector

1. Press the “Power” button to turn off the projector lamp, you will

see a message “Please press power button again to complete the

shutdown process. Warning: DO NOT unplug while the projec-

tor fan is still running.” displayed on the projector’s screen. Press

the “Power” button again to confirm, otherwise the message will

disappear after 5 seconds.

2. The cooling fans continue to operate for about 30 seconds for

cooling cycle and the Power LED will be quick

red ﬂ ash

. When

the Power LED becomes slow flashing, the projector has entered

standby mode. If you wish to turn the projector back on, you

must wait until the projector has completed the cooling cycle and

has entered standby mode. Once in standby mode, simply press

“Power” button to restart the projector.

3. Disconnect the power cord from the electrical outlet and the pro-

jector.

4. Do not turn on the projector immediately following a power off

procedure.