Справочник Пользователя для Pitney Bowes DM525

If you do not have access to a Local Area Network (LAN) connection, you 
can connect to the analog phone line connector on the back of the 



IntelliLink® Control Center. 

In order to connect the control center to a remote analog line, you need an 
A/C Adapter (P/N 1C85005).

To remove the control center and move it to another location: 

1. Turn off the power to the mailing system.
2. Pull the blue lever at the right of 

the control center towards you. 

3. Slide the control center forward 

to remove it.

4. Take the control center (and 

external modem) to where the 
analog phone line is.

5. Connect the telephone cord 

(AWG 26) from the analog 
phone line connector to the 
analog telephone line. 

6. Connect the A/C Adapter (P/N 

1C85005) to the back of the 
control center and plug it into 
an AC outlet. 

7. Add or check your postage funds as described in Checking Your 



Postage By Phone® Meter Payment System Account Balance in this 
chapter. 

8. Reinstall the IntelliLink® Control Center by sliding it into the docking 

station on top of the mailing system until you hear it click into place.

9. Turn the power back on.

NOTE:  If you need to connect to an analog phone line that is not located near 
your IntelliLink Control Center, you can remove the control center and move it to 
a location near the analog line. Refer to Connecting Your IntelliLink Control 
Center to a Remote Analog Phone Line in this chapter for more information.  

Analog Phone 
Line Connector

AC Adapter Receptacle

USB 



Connector