Справочник Пользователя для Summit HL-630 OPC
46
Xerox 5318/5340
Xerox Cartridge Part # 13R75/13R56
OEM Stated Yield: 25,000
To reset the counter in the 5318 OPC cartridges the
connector on the rear of the cartridge must be
replaced. This will clear the J7 or J8 codes. J7=
change copy cartridge, J8 = wrong or bad connector.
There are different connectors used in the 5318 and
5340 cartridges. Most of the 5318 connectors have
small fuses inside, while the 5340 uses an EEProm.
There are many different cartridges that use different
connectors for these machines. A list of some of
them is as follows: 13R75/56 (US), 13R516 (XCL),
13R57 (RX),
If you are outside the US, and are not sure what type
of connector to use, it is possible to find out by
going into the machines diagnostics. To do this turn
the machine off, press the “0” while turning the
power on. Enter “30” and press print, then enter 93
and press print again. The display will show the
installed cartridge type. 1=US, 5 = Europe, 6 =
Canada/Latin America.
connector on the rear of the cartridge must be
replaced. This will clear the J7 or J8 codes. J7=
change copy cartridge, J8 = wrong or bad connector.
There are different connectors used in the 5318 and
5340 cartridges. Most of the 5318 connectors have
small fuses inside, while the 5340 uses an EEProm.
There are many different cartridges that use different
connectors for these machines. A list of some of
them is as follows: 13R75/56 (US), 13R516 (XCL),
13R57 (RX),
If you are outside the US, and are not sure what type
of connector to use, it is possible to find out by
going into the machines diagnostics. To do this turn
the machine off, press the “0” while turning the
power on. Enter “30” and press print, then enter 93
and press print again. The display will show the
installed cartridge type. 1=US, 5 = Europe, 6 =
Canada/Latin America.