Справочник Пользователя для Toshiba B-SX5T-TS22-QM-R

Скачать
Страница из 120
2. PRINTER SETUP 
ENGLISH VERSION EO1-33059 
2.8 Inserting the Optional PCMCIA Cards
 
 
E2-14 
2.8  Inserting the Optional 
PCMCIA Cards 
 
 
When the optional PCMCIA Interface Board is installed into the printer, 
there will be a PCMCIA slot available as shown in the figure below.  
This allows the use of a Flash Memory type card.  The following 
paragraphs outline how to insert PCMCIA cards. 
1.  Make sure that the printer’s Power Switch is in the OFF position. 
2.  Hold the PCMCIA Card so that the side with the model name faces 
right.   
 
 
 
 
 
 
 
 
 
3.  The following PCMCIA cards or equivalent can be used. 
Type Maker  Description 
Remarks 
ATA Card 
San Disk,  
Hitachi 
A card conforming to the 
PC card ATA standard 
---------- 
Maxell
 
     EF-4M-TB 
Maxell 
     EF-4M-TB 
Centennial 
Technologies INC.
FL04M-15-11119-03 
Read/Write 
INTEL 
IMC004FLSA  
Simple 
TECNOLOGY 
STI-FL/4A 
Mitsubishi 
MF84M1-G7DAT01 
PC Card KING 
MAX 
FJN-004M6C 
Centennial 
Technologies Inc.
FL04M-20-11138-67 
PC Card  
FJP-004M6R 
Flash Memory 
Card (4 MB)
Mitsubishi 
MF84M1-GMCAV01 
Maxell 
     EF-1M-TB 
Flash Memory 
Card (1 MB)
Mitsubishi 
MF81M1-GBDAT01 
Read (See NOTE.) 
 
 
Eject Button 
CC 
DC 
AA 
Model Name 
Printed Side 
CAUTION! 
1.  To protect PC cards, 
discharge static electricity 
from your body by 
touching the metal cabinet 
of the printer before 
touching the card. 
2.  Before inserting or 
removing a PCMCIA card 
make sure that the 
printer’s power is turned 
off. 
3.  Be sure to protect 
PCMCIA Cards when not 
in use by putting them into 
their protective covers. 
4.  Do not subject the card to 
any shocks or excessive 
force nor expose the card 
to extremes in 
temperature or humidity. 
5.  The card may be inserted 
into the slot halfway even 
in the wrong orientation.  
However, the slot is safety 
designed so that the card 
will not seat against the 
connector pins.  
NOTE: 
Reading a read-only-type flash 
memory is possible if it has been 
used on the TOSHIBA printer, 
such as B-472 and B-572.