Справочник Пользователя для Toshiba B-SX4T

ENGLISH VERSION

EO1-33058 

1.1 Introduction

E1- 1 

 
 
 
 
 
 
 
 
 
 
 
 
 

Thank you for choosing the TEC B-SX4T series thermal printer.  This 
Owner’s Manual contains from general set-up through how to confirm 
the printer operation using a test print, and should be read carefully to 
help gain maximum performance and life from your printer.  For most 
queries please refer to this manual and keep it safe for future reference.  
Please contact your TOSHIBA TEC representative for further 
information concerning this manual. 
 
 

This printer has the following features: 

•  The print head block can be opened providing smooth loading of 

media and ribbon.   

•  Various kinds of media can be used as the media sensors can be 

moved from the centre to the left edge of the media.   

•  When the optional interface board is installed, Web functions such as 

remote maintenance and other advanced network features are 
available.   

•  Superior hardware, including the specially developed 8 dots/mm (203 

dots/inch) thermal print head which will allow very clear print at a 
printing speed of 76.2 mm/sec. (3 inches/sec.), 152.4 mm/sec. (6 
inches/sec.), or 254.0 mm/sec. (10 inches/sec.). 

•  Besides the optional Cutter Module, there is also an optional Strip 

Module, Ribbon Saving Module, PCMCIA Interface Board, 
Expansion I/O Interface Board, LAN Interface Board, Wireless LAN 
Board, the USB Interface Board, RFID module, and Fanfold Paper 
Guide Module. 

 
 

Unpack the printer as per the Unpacking Instructions supplied with the 
printer. 

 

 

 

 

 

 

 

 
 

for future transportation of 
the printer.