Справочник Пользователя для Toshiba B-SX4T

ENGLISH VERSION EO1-33058 

2.1 Installation 

E2- 2 

 

 

To insure the best operating environment, and to assure the safety of the 
operator and the equipment, please observe the following precautions. 
•  Operate the printer on a stable, level, operating surface in a location 

free from excessive humidity, high temperature, dust, vibration or 
direct sunlight. 

•  Keep your work environment static free.  Static discharge can cause 

damage to delicate internal components. 

•  Make sure that the printer is connected to a clean source of AC 

Power and that no other high voltage devices that may cause line 
noise interference are connected to the same mains. 

•  Assure that the printer is connected to the AC mains with a three-

prong power cable that has the proper ground (earth) connection. 

•  Do not operate the printer with the cover open.  Be careful not to 

allow fingers or articles of clothing to get caught into any of the 
moving parts of the printer especially the optional cutter mechanism. 

•  Make sure to turn off the printer power and to remove the power cord 

from the printer whenever working on the inside of the printer such 
as changing the ribbon or loading the media, or when cleaning the 
printer. 

•  For best results, and longer printer life, use only TOSHIBA TEC 

recommended media and ribbons. 

•  Store the media and ribbons in accordance with their specifications. 
•  This printer mechanism contains high voltage components; therefore 

you should never remove any of the covers of the machine as you 
may receive an electrical shock.  Additionally, the printer contains 
many delicate components that may be damaged if accessed by 
unauthorised personnel. 

•  Clean the outside of the printer with a clean dry cloth or a clean cloth 

slightly dampened with a mild detergent solution. 

•  Use caution when cleaning the thermal print head as it may become 

very hot while printing.  Wait until it has had time to cool before 
cleaning.  Use only the TOSHIBA TEC recommended print head 
cleaner to clean the print head. 

•  Do not turn off the printer power or remove the power plug while the 

printer is printing or while the ON LINE lamp is blinking.