Справочник Пользователя для Canon iPF8400SE
2
Select Administrator Mode and click Logon.
Note
•
If a password has been set on the printer, enter the password.
3
Click Network in the Device Manager menu at left to display the Network page.
4
Click Edit in the upper-right corner of the TCP/IPv6 group to display the Edit TCP/IPv6 Protocol Settings
page.
page.
5
Refer to the TCP/IPv6 Settings Items table to complete the settings.
TCP/IPv6 Settings Items
TCP/IPv6 Settings Items
Item
Details
Default Setting
Use IPv6
Activate to enable IPv6.
Off
Use DHCPv6
Activate when using a DHCPv6 server to acquire the IP ad-
dress.
dress.
Off
Use a stateless address
Activate when using an IPv6-compatible router to acquire the
IP address.
IP address.
On
Use a manual address
Activate when configuring the IP address manually.
Off
IP Address
Enter the printer's IP address.
::
Prefix Length
Enter the IP address prefix length.
0
Default Router Ad-
dress
dress
Enter the default router address.
::
Prefix Length
Enter the prefix length of the default router address.
0
Primary DNS Server Address
Specify the IP address of the primary DNS server.
::
Secondary DNS Server Address
Specify the IP address of the secondary DNS server.
::
Use the same host name and do-
main name as IPv4
main name as IPv4
Activate when using the same DNS host and domain names
as for IPv4.
as for IPv4.
Off
DNS Host Name
Specify the printer host name, up to 63 characters (1–63
characters). Use single-byte letters, numbers, and - (hy-
phens). Do not use numbers or - for the first character or - for
the last character.
characters). Use single-byte letters, numbers, and - (hy-
phens). Do not use numbers or - for the first character or - for
the last character.
NB-18GBip6xxxxxx
DNS Domain Name
Specify the printer domain name, up to 63 characters. Use
single-byte letters, numbers, - (hyphens), and . (periods). Do
not use numbers, -, or . for the first character, or - or . for the
last character.
single-byte letters, numbers, - (hyphens), and . (periods). Do
not use numbers, -, or . for the first character, or - or . for the
last character.
blank
Perform dynamic updating of state-
ful addresses
ful addresses
Activate this setting to automatically register the stateful ad-
dress with the DNS server.
dress with the DNS server.
Off
Dynamically update the stateless
address
address
Activate this setting to automatically register the stateless ad-
dress with the DNS server.
dress with the DNS server.
Off
Dynamically update the manual ad-
dress
dress
Activate this setting to automatically register the manual ad-
dress with the DNS server.
dress with the DNS server.
Off
6
Click OK to display the Network page.
Note
•
If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers
and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain
Name, respectively.
and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain
Name, respectively.
iPF8400SE
Configuring the Printer's TCP/IP Network Settings With RemoteUI
Network Setting
Initial Settings
483