Справочник Пользователя для Canon iPF8400SE
Paper jam.
Paper jam.
Cause
Corrective Action
A paper jam occurred in the printer during printing.
1.
Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing Jammed Roll Paper.")
2.
Load the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Rolls in the Printer.")
Paper loaded askew.
Paper loaded askew.
Cause
Corrective Action
Paper loaded crooked was detected when the paper was advanced.
If this error recurs after you reload the roll,
remove the Roll Holder from the printer,
push the roll firmly in until it touches the
Roll Holder flange, and reload the Roll
Holder in the printer.
(See "Loading Rolls on the Roll Hold-
er.")
remove the Roll Holder from the printer,
push the roll firmly in until it touches the
Roll Holder flange, and reload the Roll
Holder in the printer.
(See "Loading Rolls on the Roll Hold-
er.")
Important
•
To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose
in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems be-
cause paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the
next document when it is printed.
in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems be-
cause paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the
next document when it is printed.
Cannot feed paper.
Cannot feed paper.
Cause
Corrective Action
Paper could not be advanced correctly during feeding.
1.
Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing Jammed Roll Paper.")
2.
Load paper.
(See "Loading Rolls in the Printer.")
(See "Loading Rolls in the Printer.")
3.
Lower the Release Lever.
Cannot cut this paper.
Cannot cut this paper.
Cause
Corrective Action
There are sheets left on the Ejec-
tion Guide.
tion Guide.
1.
Lift the Release Lever and remove the paper.
2.
Load paper.
(See "Loading Rolls in the Printer.")
(See "Loading Rolls in the Printer.")
3.
Lower the Release Lever.
There is a foreign object by the
Output Tray, obstructing the Cutter
Unit.
Output Tray, obstructing the Cutter
Unit.
Lift the Top Cover and remove the foreign object.
You are not using the printer under
the recommended environmental
conditions for the paper.
the recommended environmental
conditions for the paper.
Use the printer only where the recommended environmental conditions for the paper are met.
Note that various environmental conditions are recommended for various types of paper. For
details on the recommended environmental conditions, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Note that various environmental conditions are recommended for various types of paper. For
details on the recommended environmental conditions, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
iPF8400SE
Paper jam.
Error Message
Messages regarding paper
617