Справочник Пользователя для Canon iPF825
Roll x is selected. (x is 1 (Upper) or 2 (Lower))
Cause
Corrective Action
The indicated roll is specified for a print job sent from a
computer, but that roll is not loaded.
computer, but that roll is not loaded.
Load the indicated roll and try printing again.
To print on a sheet instead, hold down the Stop button for
more than a second to cancel printing, load a sheet, and then
print.
more than a second to cancel printing, load a sheet, and then
print.
Roll x is empty. (x is 1 (Upper) or 2 (Lower))
"Lift the release lever and replace the roll."
Cause
Corrective Action
The roll is empty.
Follow these steps to replace the used roll with a new roll
of the same type and size.
of the same type and size.
1.
Lift the Release Lever and remove the roll.
2.
Load the new roll.
3.
If no barcode was printed on the roll, specify the type
of paper.
of paper.
4.
If no barcode was printed on the roll, specify the paper
length.
length.
5.
If "Not finished printing. Finish printing remaining
jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which
the error occurred.
jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which
the error occurred.
There is remaining roll paper, but because it could not be
advanced, it could not be detected.
advanced, it could not be detected.
Choose a higher level of Print Quality in the Advanced
Settings of the printer driver and try printing again.
Settings of the printer driver and try printing again.
Error Message
>
Messages regarding paper
>
iPF825
Roll x is selected. (x is 1 (Upper) or 2 (Lower))
13
893