Справочник Пользователя для Canon 1016B002
Messages regarding printing or adjusment
Messages regarding printing or adjusment
Use another paper.
Cause
Corrective Action
For automatic Printhead adjustment, we recommend
using a type of paper that you often use, other than
lm.
(→P.584)
using a type of paper that you often use, other than
lm.
(→P.584)
The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
when highly transparent lm is loaded.
Adjust the feed amount manually.
(→P.592)
(→P.592)
Cannot execute this command. Use other paper.
Cause
Corrective Action
The loaded paper cannot be used for color calibration. Load paper compatible with color calibration.*1 See
"Paper Reference Guide ." (→P.108)
*1: Always make sure the loaded paper matches the media type setting on the printer. Adjustment cannot
be completed correctly unless the setting value matches the loaded paper.
Cannot print as specied.
Press Load/Eject and replace paper with A4/LTR (vertical) or larger
Cause
Corrective Action
The loaded paper is too small.
Press the Load/Eject button and switch to paper A4/Letter,
vertical, or larger.
vertical, or larger.
Press Load/Eject and replace roll with 10 in. wide or larger roll.
Cause
Corrective Action
The loaded paper is too small.
Press the Load/Eject button and load a roll at least 10
inches (254 mm) wide.
inches (254 mm) wide.
Cannot adjust band.
Cause
Corrective Action
The Printhead nozzles are clogged.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.623)
(→P.623)
2.
Clean the Printhead if the nozzles are clogged.
(→P.624)
(→P.624)
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.
for feed amount adjustment.
Adjust the feed amount manually.
(→P.592)
(→P.592)
704 Error Message