Справочник Пользователя для Citizen Systems PMU2XXX

 

- 150 - 

 

 

Setting the Black mark/ label length

 

 

[Code] 

<

1D>H<6C>H<n1L><n1H><n2L><n2H> 

 

[Range] 

0≦n1L≦255 (24≦n1L+n1H×256≦360） 

0≦n1H≦1 
8≦n2L≦30 
n2H＝0 

 

[Outline] 

 

Define the specifications (length) of the Black mark/ label used. 
n1: Sets the Black mark pitch/ label length 
n2: Sets the Black mark length/ label gap length 
n1 and n2 are specified units of millimeters. 
Divide the maximum Black mark pitch/ label length by 256 with the quotient designated as n1L and 
the remainder as n2H. Accordingly, the Black mark pitch/ label length available for setting will be 
n1L+n2H×256. 

 

 

• If the specified length is outside of Black mark/ label specifications, the default length is set.

 

• 360 mm is the maximum Black mark pitch/ label length allowed to define and 24 mm is the 

minimum. 

• 30 mm is the maximum allowable Black mark length/ label gap length to define and 8 mm is the 

minimum. 

 

 

 

The following default values are set when memory switch SW4-1 is set to ON.

 

n1L=25  n1H=0  n2L=8  n2H=0 

 

 
 
 
 
 
 
 
 
 
 

n1L+n1Hx256 

n2L+n2Hx256 

n1L+n1Hx256 

n2L+n2Hx256