Справочник Пользователя для Citizen Systems PMU2XXX

 

- 219 - 

2.2.18  Other Commands 

 

Real-time request to printer 

[Code]   

<

10>H<05>H<n> 

 

[Range]     

0≦n≦2 

 

 

The printer responds in real-time to the request that the host specifies with number “n”.

 

 

n Function 

At the setting of execution of GS ^ by the FEED switch, the same processing as that 
pressing the FEED switch once is carried out. 

0 

After recovering from an error, the printer resumes printing from the beginning of the line 
where the error occurred. 

1 

2 

The printer clears the receive buffer and the print buffer, and then recovers from the error.

 

 

• (n = 1) or (n = 2) shall be used after removing the error. 

• If another data string of <10>H<04>H<n> (1 n 4) is received, the printer acts the same way as 

with this command. Therefore, the user should be reminded of this fact. 

[Example 1] 
Suppose a command “ESC * m nL nH [d1 ... dk]”, where d1 = <10>H, d2 = <04>H, d3 = <01>H. 

• The DLE EOT n command cannot be interleaved into the code string of another command 

consisting of 2 bytes or more. 

[Example 2] 
If the printer sends DLE EOT 3 after the host has sent up to ESC 3 in its attempt to send ESC 3 n, 
the printer handles the ESC 3 as ESC 3 <10>H. Thus, the user should be cautious. 

• This command is ignored during transmission of block data. 

 

[See Also]