Справочник Пользователя для Citizen Systems PMU2XXX

 

- 59 - 

 

 

Specifying/canceling the black/white inverted printing

 

 

[Code] 

<

1D>H<42>H<n> 

 

[Range] 

0≦n≦255 

 

 

 

This command specifies or cancels the black/white inverted printing. 
• “n” is valid only for the lowest bit (n0). 
• Control by the lowest bit (n0) is shown as follows: 

 

0 

The black/white inverted printing is canceled. 

1 

The black/white inverted printing is specified. 

 

 

• The black/white inversion works on internal and downloaded characters.

 

• The black/white inversion works also on the right spacing of characters defined by ESC SP. 
• This command does not affect the bit image, downloaded bit image, bar code, HRI characters, or 

the skip area specified by HT, ESC $, or ESC  ＼.

 

• This command does not affect the space between lines.

 

• Black/white inversion specification takes precedence over underline specification. Underline 

printing specified is, therefore, nullified if black/white inversion is specified; the underline setting, 
however, remains unchanged.

 

 

 

n=0