Справочник Пользователя для Citizen Systems BD2-2220

 

- 67 - 

ESC  ＼ nL nH 

 

 

Specifying the relative position

 

 

[Code] 

<

1B>H<5C>H<nL><nH>     

 

[Range] 

0≦nL≦255 

0≦nH≦255 

 

 

 

This command specifies the next print start position in a relative position with respect to the current 
position. The next print start position will be at a point of [(nL+nH×256)×basic calculation pitch] 
inches away from the current position.

 

 

• Specification of a position outside the print area is ignored.

 

• If a new position is specified to the right of the current position in the direction of printing, it should 

be specified as positive (+). If it is to the left, it should be as negative (–).

 

• A negative value is the complement of 65536. For example, to move the position by N pitches to 

the left, specify it as: nL + nH x 256 = 65536 – N

 

• Fractions resulting from calculation are corrected with the minimum pitch of the mechanism, and 

the remainder is omitted.

 

• In STANDARD MODE, this command uses the horizontal basic calculation pitch (x). 
• In PAGE MODE, this command acts differently depending on the start point: 

(1) If the start point specified by ESC T is top left or bottom right, the command specifies the 

relative position in the direction perpendicular to the paper feed (The character’s side-to-side 
direction), using the horizontal basic calculation pitch (x). 

(2) If the start point is top right or bottom left, the command specifies the relative position in the 

paper feed direction (The character’s side-to-side direction), using the vertical basic calculation 
pitch (y). 

 

[See Also]