Справочник Пользователя для Xerox 3315/DN

Loading Paper

Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide

146

1.

Lower the bypass tray 

, located on the front of the 

machine and unfold the paper support extension

.

2.

Prepare a stack of paper for loading by flexing or fanning 
it back and forth. Straighten the edges on a level surface. 
Remove any curl on postcards, envelopes and labels 
before loading them into the bypass tray. 

Note:

The bypass tray can hold a maximum of 50 sheets 

of 20 lb (80 g/m²) bond paper, 5 transparency sheets or 
5 envelopes. 

3.

Load the print material between the width guides with 
the print side facing up.

Note:

Hold transparencies by the edges and avoid 

touching the print side.

4.

Adjust the paper guide to the width of the stack of print 
material. Ensure you have not loaded too much print 
media. The stack should be under the Maximum Fill line 
indicated by the symbol

.

5.

When printing from your computer, ensure you select the 
Select Paper button to specify the correct paper size, 
color and type. Not confirming the paper details may 
result in printing delays. For information about setting 
the paper type and size on the control panel, refer to 

Note:

The settings made from the printer driver on your 

computer override the settings on the control panel.

6.

After printing, remove any unfed paper and close the 
bypass tray

.

1.

Lower the bypass tray, located on the front of the machine and unfold the paper support 
extension.

2.

Remove any curl on envelopes before loading them into the bypass tray. Prepare a stack of 
envelopes for loading by flexing or fanning them back and forth. A maximum of 5 envelopes can 
be loaded. Straighten the edges on a level surface.

Note:

For more information on media specifications, refer to