Справочник Пользователя для Panasonic SV-P10U

Скачать
Страница из 28
11
2
1
4
Basic Functions
Printing images
1
Insert a Memory Card. 
(
l
l
l
l
10)
≥Images marked with the DPOF option will be printed. This feature 
is usually found in the digital camera or other SD video devices. 
This printer cannot be used to mark the desired photos using 
DPOF.
≥If DPOF is not implemented, whole images are printed in order, 
commercing from the last one captured .
2
Hold down the Power Button [ 
 
] for about 2 seconds.
≥The Printer is turned on.
≥When the [ACCESS] Lamp goes off and the [PRINT] Lamp lights 
up, the Printer is ready to print.
3
To execute the four-picture print (4 of same image), 
press the 4-Picture Mode Button [ 
 ]. 
≥The “ 
 ” Lamp lights.
≥Each pressing of this button alternately switches the mode (one 
picture or four pictures).
4
Insert a sheet of paper with the [ 
ª/[1]/[4] ] mark side 
down into the [PAPER IN 
1
] slot (Upper slot).
≥Make sure the paper is fed into the [PAPER IN 1] slot on the unit. 
The Paper will then start to print.(If the Paper is not fed, push paper 
lightly to begin paper feed process)
≥The paper is moved forward and backward several times and exits 
from the Paper Exit Slot. The printed paper is then ready to be 
removed from the Paper exit slot.
≥When the 4-picture mode is selected, the same four pictures are 
printed equally on the quarterly divided sections of the paper.
Do not insert a sheet of paper into the Paper Exit Slot (lower 
slot), or paper jam may occur.
5
Repeat steps 3 and 4.
≥The [PRINT] Lamp goes off after the total number of sheets (the 
specified number of sheets, if DPOF is implemented) all printed.
Stopping Printing
Press the Power Button [ 
 ] for about 2 seconds to stop printing 
and turn off the power after the completion of current print job.
≥Please read the “P recautions” carefully. (
l
l
l
19)
≥“DPOF”: Digital Print Order Format; a feature that allows the user to 
mark photos that they wish to print. This feature is usually offered by 
the digital camera or other SD video devices.
≥While the [ACCESS] Lamp is on, never take the card out or turn the 
power off. Additionally, never add any oscillation or shock on the 
device. This may cause damage to the memory card or the data 
contained in the card.
≥Do not forcibly pull the Ink Film or paper. Do not allow fingerprints or 
dust or water to contact the Ink Film or paper.
≥Do not forcibly pull out the paper while printing is in progress.
≥If the [ 
 ] Lamp flashes, the battery will run down shortly. Recharge 
the battery or plug the cord of the Printer into a wall outlet.
≥If the [ERROR] Lamp lights up or flashes, refer to “Error Lamp” on page 
22.
≥When you insert a sheet of paper before the [PRINT] Lamp lights, 
printing does not occur. Re-insert the paper after the [PRINT] Lamp 
lights.