Справочник Пользователя для FARGO electronic C16
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0)
45
Resolving the Ribbon Breaking issues (continued)
Step Procedure
4
Adjust the Image Placement positively.
a. Reset the Printer to clear any Error Messages by removing Power and
reapplying.
b. Open the Printer Control Panel from the Computer.
•
If using Windows 95/98/ME, right click on the C11_C16 Card Printer Icon
and select Properties.
and select Properties.
•
If using Windows NT 4.0, right click on the C11_C16 Card Printer and
select Document Defaults.
select Document Defaults.
•
If using Windows 2000/XP, right click on the C11_C16 Card Printer and
select Printing Preferences.
select Printing Preferences.
c. Click the Calibrate tab.
d. Click on the Settings button.
e. Adjust the Image Placement setting by +10. (See the previous page.)
f. Click
on
OK.
g. Print a Self-Test.
h. After adjusting the Image Placement, if a white edge appears on the card,
adjust the image placement back toward its original value in increments of 2
until the white edge is gone.
until the white edge is gone.