Справочник Пользователя для Epson TM-P60

❏ POWER LED

❏ ERROR LED

❏ BATT. LED

❏ FEED button

The control panel has a FEED button that you may have to use, although most paper handling 
functions will be handled by your software. 

Use this button to feed roll paper or to start a roll paper self test, or start printing status sheet. 
( See “3.5.1 Self test mode” on page 3-3.)

On

Power is on.

Off

Power is off.

Flashing

The printer is in power-off operation or is in an area where wireless communication is not possible.

Power On

On

Printer is offline (paper out, power-on initialization, roll paper 
cover open, power-off operation, or the remaining battery 
charge is not enough for printer operation when the battery is 
used to supply the power.) 

Off

Printer is online.

Flashing

It indicates an error. See “3.1 LED Blinking Pattern” (page 3-1) for 
troubleshooting

Power Off, battery installed, and 
AC adapter connected

On

Indicates that an abnormality occurred during battery 
charging. The battery must be replaced with a new one.

Off

No problem.

Power On without AC adapter

On

Remaining battery charge is not enough. It must be charged.

Off

Remaining battery charge is adequate.

Flashing

Remaining battery charge is below half.

Power Off and battery installed

On

The battery is being charged.

Off

The battery is fully charged.