Справочник Пользователя для Samsung SCX-1150F

Troubleshooting

Part of the printed 

page is blank.

• The page layout is too complex. Simplify the page layout 

and remove any unnecessary graphics from the 

document if possible.

• The page orientation setting may be incorrect. Change 

the page orientation in the Printer Properties dialogue 

box.

• The paper size and the software paper size settings do 

not match. Insert the correct paper into the product or 

change the software paper size settings.

• Scaling may be set to less than 100%. Change the 

Scaling setting in the Printer Properties dialogue box.

• If using a parallel cable, ensure that it is compliant with 

an IEEE-1284 rated cable.

Your product prints 

the wrong data, or it 

prints incorrect 

characters.

• The printer cable might not be connected properly. Check 

the printer cable connection.

• There may be a problem with the printer driver software. 

Exit Windows and reboot the computer. Turn the printer 

off and then back on again.

• If using a parallel cable, ensure that it is compliant with 

an IEEE-1284 rated cable.

Printing is too slow.

• You may be using High and Maximum print quality. 

• If you are using Windows NT, the Scheduling setting may 

be set incorrectly. From the Start menu, select Settings 

and Printers. Click your printer icon with the right 

mouse button, select Properties, click the Scheduling 

tab. Then, select the desired scheduling setting from the 

available choices.

When printing using 

the USB connection, 

an error occurs 

repeatedly.

When the USB mode is set to “FAST”, the communication 

between the product and the computer may be poor. 

Change the USB mode to “SLOW”. To do so, take the 

following steps:

1. Press Setup on the operation panel. You can see

“1.SYSTEM SETUP” on the bottom line of the display.

2. Press Enter.
3. Press the Scroll buttons (  or  ) until you see 

“USB MODE” and then press Enter.

4. Press the Scroll buttons (  or  ) to select “SLOW”

and then press Enter to save the selection.