Справочник Пользователя для Samsung SRP-250 Series

                                 

16

Chapter 6. The self test 

 

The self-test checks whether the printer has any problems. If the printer does not function 
properly, contact your dealer. The self-test checks the following; 
 

1.  Make sure paper roll has been installed properly. 

2.  Turn on the power while holding down the FEED button. The self-test begins.

 

3.  The self-test prints the current printer status, which provides the control ROM 

version and the DIP switch setting.

 

4.  After printing the current printer status, self-test printing will print the following, 

and pause (The PAPER LED light blinks).                                        

 
 

 

 
 
5.  Press the FEED button to continue printing. The printer prints a pattern using 

the built-in character set. 

6.  The self-test automatically ends and cuts the paper after printing the 

following. 

 

         The printer is ready to receive data when it completes the self-test.