Справочник Пользователя для Samsung 1865

Media and tray_ 32

Exposed areas can cause labels to peel off during printing, which can 

cause paper jams. Exposed adhesive can also cause damage to 

machine components.

•

Do not run a sheet of labels through the machine more than once. The 

adhesive backing is designed for only a single pass through the 

machine.

•

Do not use labels that are separating from the backing sheet or are 

wrinkled, bubbled, or otherwise damaged.

Postcards, cards and other custom-sized materials can be printed with this 

machine.

•

Do not print on media smaller than 76 mm (3.00 inches) wide or 183 mm 

(7.20 inches) long.

•

In software applications, set the margins at least 6.4 mm (0.25 inches) 

away from the edges of the material.

•

Letterhead/ Preprinted paper must be printed with heat-resistant ink that 

will not melt, vaporize, or release hazardous emissions when subjected 

to the machine’s fusing temperature (about 170°C(338 °F) for 0.1 

second. 

•

Letterhead/ Preprinted paper ink must be non-flammable and should not 

adversely affect machine rollers.

•

Forms and letterhead should be sealed in a moisture-proof wrapping to 

prevent changes during storage.

•

Before you load letterhead/preprinted paper, verify that the ink on the 

paper is dry. During the fusing process, wet ink can come off preprinted 

paper, reducing print quality.

The surface of the output tray may become hot if you print a large 

number of pages at once. Make sure that you do not touch the 

surface, and do not allow children near it.

The printed pages stack on the output support, and the output support will 

help the printed pages to align. The printer sends printouts to the output tray 

by default.